---------- Forwarded message ----------
From: Robert Downes <bobdownes@gmail.com>
Date: Tue, Apr 3, 2012 at 8:42 PM
Subject: Re: Rear Wheel Bearing Options
To: pat <psdooley@verizon.net>

IIRC, all i needed was a brass drift, a mallet, and some amount of patience
to avoid damage to the housing and mine came out fine.

-bob

On Tue, Apr 3, 2012 at 8:12 PM, pat <psdooley@verizon.net> wrote:

> Probably something like a long bolt or piece of all-thread, proper size
> pushers like a big socket or pipe section, nuts, washers, cold chisel,
> punch, hammer, dremel.
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
> Edward Maglott
> Sent: Tuesday, April 03, 2012 8:54 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: Rear Wheel Bearing Options
>
> Yeah, now that I think about it, I've done the front with no
> press.  How can you do it with the bearing housing still on the
> van?  Some sort of puller?
> Thanks for any further tips on this.
> Edward
>