So i did a go westy 1.9 to 2.1 engine swap with pretty much new everything.Installed and went to fire it up. nothing.... i mean it cranks but no fuel pump/injectors.So i jumped the fuel pump and all runs as it should.�Went through the bentley manual for testing power and fuel pump relays and both relays failed the tests and the manual says replace ecu.�So my question is this.... Only thing i found in error was i had swapped the number 3 and 4 fuel injectors. just spaced out on this. Would this fry the ecu??Another weird thing is .. keeping in mind the relays are good. when i bridge the power relaythe fuel pump DOES NOT kick on. Would this be indicative of a bad ecu?I looked at the wiring diagrams and it seems the pump should kick on regardless of the ecu's state. Am i mistaken in this?So... if anyone is in the southern pa area that may have a good 1.9 ecu that i could swap in to see if it sorts my problems i would GREATLY appreciate it!Cheers and
 Thanks,Jess