Thanks much Frank.

Now I can gussy up my FI's!

Had also wondered if POR eats away fuel injector plastic (paint bleeds
a hair onto plastic) and that if paint too thick on parts, the big
rubber O ring might be too tight of a fit. But ..... bracket shape
seems to allow for a little expansion of the large O-ring.

And those are some attractive prices on used POR'd parts. Good to know
aboot. (Can-con)    ;^)

What would be nice is if regular BASF or ? body paint would be
suitable as a top coat over POR on intake runners.  Match the Slate
Blue I have.

Neil.

On Thu, May 10, 2012 at 2:36 AM, Frank Condelli <RAlanen@aol.com> wrote:

> � � � �No problem, I've done this many times, works well. �If you look at my <www.frankcondelli.com/por15.htm> webpage you will see I have the brackets POR-15ed ready to go.
>
>
> On 2012-05-09, at 10:51 PM, Automatic digest processor wrote:
>
>> Hi all.

>> The brackets and FI bodies were VERY rusty. I covered the ends and
>> wire wheeled them.
>>
>> I don't think they see a lot of heat but anyone know if POR will work?
>> (not bubble off or whatever due to heat)

-- 
Neil n

65 kb image Myford Ready For Assembly �http://tinyurl.com/64sx4rp

'88 Slate Blue Westy to be named.

'81 VanaJetta 2.0 "Jaco" �http://tubaneil.googlepages.com/

Vanagon VAG Gas I4/VR Swap Google Group:

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines