For those with air cooled engines the injectors have a resister in series
with them. Direct connection to a 12 volt source can fry them.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Scott Daniel - Turbovans
Sent: Saturday, May 12, 2012 3:17 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: How many Volts at the injectors

I energize my injectors with 12 volts when I am operating them manual with
electricity.
I don't 'leave' them energized..
I just click them with 12 volts of and on.

scott

On 5/11/2012 8:24 PM, HotelWestfalia wrote:
> I want to build a unit to clean injectors and need to know what voltage to
apply to them.
> The book is only talking about the "flickering" when checking.
>
> Zoltan
>