

| Subject: | Re: Temp Gauge -- why did this happen? |
| From: | Rocket J Squirrel |
| Date: | Wed, 9 May 2012 08:44:44 -0700 |
Yeah, I don't know who that David "Bereil" fellow is. Probably related to the various poeple who pose as me but invariably drop either an "l" or a "t," or both, from my last name. On 05/08/2012 08:12 PM, David Beierl wrote: > [The gauge was] was reading the output of that crappy old > coolant-level controller that sends a continuous instead of pulsed > overheat signal to the gauge. Get one of the newer square ones, > you'll be glad. The light will blink for low level in the pressure > bottle, but the needle won't move appreciably. And I bet the controller lives buried deep within the dash. The very dash that I pulled and re-installed this weekend and said I would /never/ do again without a really good reason. No sir, I ain't gonna do it. Besides, I bet a blinker light PLUS a skyrocketing gauge will increase the odds I will spot it. And, darn, wouldn't you know it, I forgot to install the modified gauge you built for me with the buzzer connections. Sigh. Well, pulling the instrument cluster isn't nearly as difficult as the dash. -- Jack "Rocket j Squirrel" Elliott Bend, Ore. 1984 Westfalia. A poor but proud people. 1971 "Ladybug"-brand utility trailer ca. 1972 from a defunct company in San Clemente, Calif., now repurposed as The Westrailia. On 05/08/2012 08:12 PM, David Beierl wrote: > At 10:52 PM 5/8/2012, Rocket J Squirrel wrote: >> Within a few moments the temp gauge started climbing. Obviously the >> engine, which had been on for fewer than 15 seconds, was overheating. >> >> So what was the gauge reading? > > It was reading the output of that crappy old coolant-level controller > that sends a continuous instead of pulsed overheat signal to the gauge. > Get one of the newer square ones, you'll be glad. The light will blink > for low level in the pressure bottle, but the needle won't move > appreciably. > >> Suggestions from anyone other than David Bereil are welcome. He told me >> to test the new radiator by jamming a screwdriver through the coils. I'm >> not sure I can trust him any more. > > Wonder who dat guy is? What a maroon! Funny, his name is somewhat > similar to mine (Beierl, means clodhopper er, ah, Bavaria in > plattdeutsch). I did mention a screwdriver in connection with the new > radiator but that was an installation step, not for testing. For testing > I always say you can't beat a crossbow. > > Yr obdt et cetera et cetera, > Skimbleshanks >
Have something to add on this topic today? Revive this thread in the forum »