

| Subject: | Re: Audi help need in Robbinsville, NC |
| From: | Dennis Haynes |
| Date: | Fri, 18 May 2012 23:02:54 -0400 |
I don't mind helping anyone so no problem even if not Friday. What do you really mean by "running out of brakes"? Pads worn to metal or pedal to the floor? Pads can be changed without need to bleed the brake system although especially with ABS I like to open the bleeders while the calipers are being retracted so as not to push the fluid back into the system. Even with ABS the system can be bleed using conventional methods. Sounds like something in the hydraulics has failed and some troubleshooting may be needed. Dennis -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Jason Sent: Friday, May 18, 2012 6:40 PM To: vanagon@GERRY.VANAGON.COM Subject: OT: Audi help need in Robbinsville, NC It's Friday so I hope this post is acceptable. Friend of mine is visiting North Carolina and ran out of brakes on his 2008 Audi A4 Q. He had to drive 2 hrs just to get a set of pads even. He is in currently in Robbinsville, NC. A local garage installed them and managed to screw up bleeding the system. They do not have a pressure bleeder, and I suspect there is air in the ABS unit now. Any one know a qualified shop not too far? There is very little pedal pressure (was great before). Multiple attempts to manual bleed has not been very successful. I was on the phone with him when I heard the mechanic asking where to lift the car from even.....<roll eyes> PM off the list if you have any suggestions. Thanks, Jason 83 Westy in Canada.
Have something to add on this topic today? Revive this thread in the forum »