You might try some of that SA Besto 2000 aerosol lube available from
professional tool suppliers or online.   It has a very penetrating carrier
and a sticky grease that works wonders on most stuff.  I use it all over in
my van...especially on stuff like my shift linkage, the suspension
bushings, cables, etc...  It is expensive, but it's a lot better than the
usual hardware store stuff.   My mechanic buddies swear by it and all the
shops I frequent have it kicking around...
  Don Hanson

On Mon, May 21, 2012 at 4:44 PM, neil n <musomuso@gmail.com> wrote:

> I know. Crazy thought but.....
>
> The belts are off my WBX so....
>
> I imagine the coolant itself is the lube and/or the pump is pre lubed,
> but can one sneak lube onto the little bit of exposed coolant pump
> shaft? If so, what lube?  I have some super "sticky" grease I could
> cut with chain lube or something like that. Wouldn't want any of it
> thrown onto the belt(s)
>
> Thanks
>
> Neil.
>
> --
> Neil n
>
> 65 kb image Myford Ready For Assembly  http://tinyurl.com/64sx4rp
>
> '88 Slate Blue Westy to be named.
>
> '81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/
>
> Vanagon VAG Gas I4/VR Swap Google Group:
>
>
> http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines
>