Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Radius rod/arm sourced
From:neil n
Date:Fri, 25 May 2012 09:59:52 -0700

Shoulda used quotes. Meant "welded". e.g.: super rusted!    :)

Neil.

On Fri, May 25, 2012 at 9:55 AM, ralph meyermann
<ralphmeyermann@gmail.com>wrote:

> They didn't appear to be welded,a health layer of rust though
>
> Velma 82diesel 1.6 na westy
>
> On May 25, 2012 11:53 AM, "neil n" <musomuso@gmail.com> wrote:
>
> I could be using the wrong term, but am referring to part between lower
> ball joint and control arm. The radius rod attaches to bottom of the
> adaptor. An image of my '81 while I was doing the radius arm bushings job.
> You can see the new lower ball joint installed to the adaptor I refer to:
>
> http://sites.google.com/site/tubaneil2/RadiusArmInstall.jpg
>
> Neil.
>
>
>
> On Fri, May 25, 2012 at 9:40 AM, ralph meyermann <ralphmeyermann@gmail.com>
> wrote:
> >
> > Adaptor?  A...
>
> --
> Neil n
>
> 65 kb image Myford Ready For Assembly  http://tinyurl.com/64sx4rp
>
> '88 Slate Blue Westy ...
>
>

--
Neil n

65 kb image Myford Ready For Assembly  http://tinyurl.com/64sx4rp

'88 Slate Blue Westy to be named.

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG Gas I4/VR Swap Google Group:

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines