At 03:51 PM 5/31/2012, ed donnen wrote:
>oh bugger!  My turn signals work.  I was hoping it was the relay- I
>just found it in the diagram. The EF just gives me a signal of the
>directionals as "steady on"

My Bentley is at the shop right now, but the main thing the 4-way
switch does is change the power source to one that's always on, and
hook the two sides of the car in parallel.  May be a switch
issue?  Possibly a bent pin if you've had it unplugged?  Hope this
helps a bit.  My article about circuit tracing at the vanagon wiki
may help if you're having trouble following the circuits out.  All
switches are shown in their off or mechanically neutral position.

Yrs,
d