Fastenal has the item with a built in flat washer in an excellent
quality grade. I took one of mine down as an example and left with a
set of six yesterday.

I make a habit of replacing all my allen-socket bolts as soon as they
show the least bit of wear. It's one thing to deal with them in the
driveway, another to deal with them on the side of the road.

Jim

On Thu, May 31, 2012 at 6:23 PM, Dennis Haynes <d23haynes57@hotmail.com> wrote:
> The pin is 6mm X 18mm, part number N90010002.
>
> The bolts for the pressure plate are M8 X 16 X 1.25. N0102935. If you feel
> the need for washers use good quality wave washers or hardened flats.
>
> Dennis
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
> nirav patel
> Sent: Thursday, May 31, 2012 5:39 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: specs for the 3 roll pins and six bolts for the clutch
>
> Howdy.
>
> Was wondering if you might know the spec or where I could source the
> following?
>
> . 3 roll pins that align the clutch to the flywheel . 6 bolts for the clutch
>
> I called my local VW pick-n-part, but they had nothing for me. They
> recommend that I find the spec and be sure to use grade 8 bolts when
> replacing.
>
> I would pull the parts from my 1.9 in my westy, but due to space I'm having
> to dress the zetec engine independent of working on the van.
> I'm doing all this in front of my condo and our courtyard at the moment.
> Wish me luck.
>
> http://niravpatel.posterous.com/amurican-made-come-along-tool
>
> +nirav