Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: CO Adjusting Screw. PO Set it All The Way In? Base Setting?
From:neil n
Date:Thu, 21 Jun 2012 11:54:59 -0700
Sorry.

This is for a stock 2.1 WBX.

Thanks

Neil.

On Thu, Jun 21, 2012 at 11:36 AM, neil n <musomuso@gmail.com> wrote:

Hi all.
>
> The protective cap on the CO screw was drilled and tapped. Checked CO
> screw setting. It's all the way in.
> .....
>

> I've seen posts in archives suggesting a base setting for CO adjust screw
> is anywhere from 1.5 to 3.5 turns from seated in.
>
> Can anyone confirm or suggest a base setting?
>
>
--
Neil n

65 kb image Myford Ready For Assembly  http://tinyurl.com/64sx4rp

'88 Slate Blue Westy to be named.

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG Gas I4/VR Swap Google Group:

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines