You got it. They are straight for the most part, but they have a
little jog to the side, a mirror image in each pipe, to allow some
"give" for temperature changes and vibrations. You will see what I
mean when you look at it. I did one in just a few minutes, laying it
alongside the old one as a guide. Still working today, that was ten
years ago.

Jim

On Sun, Jul 15, 2012 at 5:59 PM, Spencer Allen <spencervw@aol.com> wrote:
> After installing a new Go Westy propane tank I kinked the copper lines to the point where they will have to be replaced. I see the stove-frige fittings when looking up through the cabinet. Before I tackle the rusted screws on the floor plate the lines go through under the van is there some thing under it that I need to look out for? Is running the new lines a simple matter of feeding the new line up to the stove and bending the lines (with a bender this time) in the right spots. The tank install was bear in itself (see other post). Thanks for any help.
> Spencer
> 85 Westy