On Sun, 05 Aug 2012 11:24:11 -0600, David Beierl <dbeierl@attglobal.net>
wrote:

>
>> Perhaps someone with a working fridge can measure the operating voltage
>> there with full flame and pilot flame.  It's not necessary to pull the
>> fridge as you can measure at the LED panel.
>
> For someone willing to do that, it's the black wire that's separate from
> the main LED panel plug.  Ground is the black wire at pin 6 of the main
> plug.
>

I assume the measurement is made while running on gas.  While lighting it,
while it is lit, and when it goes out?

I can get to the black wire in the cabinet to the right of the fridge.
Would I disconnect the black wire from the connector leading to the
harness, and then measure between the end of the black wire that leads to
the fridge and ground?

Excuse me for stating what is probably obvious, but I don't know precisely
what to do.  I've got the voltmeter and know how to use it, but not how to
measure this.

Thanks!

--
==Leonard