

| Subject: | Re: Putting on tires: three hands |
| From: | Tom Buese |
| Date: | Tue, 28 Aug 2012 11:46:11 -0400 |
I use the difficult both feet & 2 hands technique to hold wheel till I get bolts in place. Place butt on ground in front of said axle, lift up wheel w/ hands & hold steady w/ sides of feet while aligning wheel w/ arms/inserting bolts. I think even w/ a fused ankle(?) one could do this, but I might be wrong again. YMMV, Mr. BZ-4 extremities are better than 3? On Tue, Aug 28, 2012 at 10:43 AM, Tom Hargrave <thargrav@hiwaay.net> wrote: > The trick is two hands and a knee, or to carefully lower the car until you > can get one hole to line up. > > Thanks, Tom Hargrave > www.stir-plate.com > www.towercooler.com > www.kegkits.com > www.grow-sun.com > > > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of > Rocket J Squirrel > Sent: Tuesday, August 28, 2012 9:29 AM > To: vanagon@GERRY.VANAGON.COM > Subject: Putting on tires: three hands > > So yesterday I swapped out the two front tires on my van with a pair of > older ones due to excessive wear on one of the newer ones. My stepson, a > tow > truck driver for ten years now, was on hand to help the old man. > > "I hate cars that use bolts instead of having studs on the wheels," he > said. > > I can see his point. With studs, you have something to hang the heavy tire > on, but with bolts, I found myself needing three hands: two to lift and > align the bolt holes and a third to start the first bolt. He provided that > third hand. I'm hoping I'll never have to do it by myself. > > -- > Jack "Rocket j Squirrel" Elliott > 1984 Westfalia, auto trans, > Bend, Ore. > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 10.0.1382 / Virus Database: 2437/5227 - Release Date: 08/27/12 > -- Tom Buese
Have something to add on this topic today? Revive this thread in the forum »