On 8/28/2012 1:28 PM, Rocket J Squirrel wrote:
> You must have a smaller center hole in your rims than I. Here, when the
> rim is hanging from the hub, all the holes in the rim sit below their
> corresponding holes in the wheel.

It's not too hard to just swing/rotate the wheel and get a bolt hole
lined up. The wheel isn't centered at that point, but after you get the
first bolt in, it's easier to do so.

Think of it the other way - remove 4 bolts, loosen the last, and let the
wheel flop so it hits the hub. That - in reverse.