

| Subject: | New Shurflo faucet |
| From: | J B |
| Date: | Wed, 5 Sep 2012 20:30:25 -0400 |
Hi Everyone I have just replaced my Delta 6 faucet with the Shurflo unit and have a ques= tion about wiring. I believe the switch on the old unit was bad so the previous owner installed= a manual switch underneath the sink so I'm not sure as to the original wiri= ng. From the back of the drivers seat are three wires - one red and two white. P= .O. spliced into the red and one of the white to install the switch and dis= connected the original in-line water pump (yellow/black) wires. I am now reconnecting the original black/yellow wires and have removed the p= revious owners switch but there is an extra white wire from under the driver= s seat that I'm not sure what it is for? Sorry for the newbie question - I don't have a volt meter and the Bentley di= agram is confusing me further. Thanks - John.
Have something to add on this topic today? Revive this thread in the forum »