Hi All,

I am slowly starting to reassemble my 2.1 after a full teardown.  It has been recommended on Samba to "dry" assemble the bottom end, pistons and cylinders to check for clearance issues.  I am using the AA 95.5 pistons.  I have the #1 piston and cylinder in place and there are no clearance issues.  My question is do I need to install all 4 jugs and pistons, or can I assume that if there is no issue on #1 that they all will be OK.

Thanks,
Finn Runyon 
89 Westy Roo
87 Westy Pooh