Hi Mark. I may be wrong, but when key turned to ign. on  (15 power only).....

B+ --> Digifant relay --> FI's

If meter probes on FI positive and frame, current measured may
Digifant relay load (coil) and/or wire resistance. i.e. a small
current may be normal.

But maybe  "cut the key  on"  means turning key to 50 (engaging
starter)? This would mean that FI's pulse on/off.

Though I don't think a failed or failing FI is the issue, (poss.
engine flooding cued me to this) FWIW, resistance value for FI's on
2.1:

each FI (unplugged) 15-20 Ohms. Via 12 & 14 of ECU connector (ONE FI
plugged in at a time) same.

Mark Drillock posted this neat bypass tool:

http://www.thesamba.com/vw/forum/viewtopic.php?t=349429&highlight=bypass

Owner/shop should read the post, but AFAIK, it takes battery  +
directly to certain components/points, thus bypassing common trouble
spots; ign. switch, relays.

IMO, tool likely only useful if owner can properly assemble it. Shop $
to make it likely better spent trouble shooting via Bentley methods.

Neil.

Neil.

On Wed, Sep 26, 2012 at 9:49 AM, Mark Dearing <VWBrain@aol.com> wrote:
> have a friend who is stranded in jersey, he found a shop to  help,  tech
> says the injectors have a faint current when you cut the key  on, engine seems
> to be flooded.  any ideas?  thanks mark  d

--
Neil n

65 kb image Myford Ready For Assembly  http://tinyurl.com/64sx4rp

'88 Slate Blue Westy to be named.

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG Gas I4/VR Swap Google Group:

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines