Cutting some bottom coils off is still probably the easiest and cheapest
way. Cut 2 off first, see what happens, then 1 more and see what
happens. Repeat as needed until you are happy with the height. Then add
a big center donut inside the bottom coil that is left, centering it on
the lower spring post of the control arm.

Mark

Ben T wrote:
> The rear springs are narrower towards the top and bottom. Cutting a coil would not leave a surface which seats properly. Height is all I need. IIRC the Carat springs have the same number of coils but less spacing between them.
>
>
> BenT
>
>