Mark,

What do you mean by "...big center donut..."? Is there some generic spacer which can work in this application? I see the centering post on the swingarms. I'm guessing you are suggesting a larger washer in the form of a rubber "donut" can take up the space between that post and the resulting larger coil when the tapered coil is cut off.

BenT
sent from my electronic leash

On Sep 27, 2012, at 2:15 PM, mark drillock <mdrillock@cox.net> wrote:

> Cutting some bottom coils off is still probably the easiest and cheapest way. Cut 2 off first, see what happens, then 1 more and see what happens. Repeat as needed until you are happy with the height. Then add a big center donut inside the bottom coil that is left, centering it on the lower spring post of the control arm.
> 
> Mark
> 
>>