I use a single spare stud for this. After I take out one of the three
bolts I hand thread the stud into the hole before removing the other two
bolts. This keeps the parts lined up while I replace the belts. When I
have it back together loosely I take the stud out and put in the last
bolt. Then I evenly tighten all 3 bolts around and around until tight.

Mark

ralph meyermann wrote:
> If keeping stock set up to make it easier you can get some studs to put
> into the water pump,its a pain trying to align up all the holes to bolt up!
>
> Velma 82diesel 1.6 na westy
>
>