Thanks I will check that.  

> Date: Wed, 3 Oct 2012 19:25:55 -0700
> Subject: Re: Hazards not working properly 84 Westy
> From: oldvolkshome@gmail.com
> To: fittdog8848@hotmail.com
> CC: vanagon@gerry.vanagon.com
> 
> Well, let's troubleshoot for a bit.
> 
> *  Do the Turn Signals work (of course w/Ignition ON)?  If so, the
> Flasher, which operates either one.  If not, Flasher or the Fuse is
> suspect.  Can't remember which fuse position it is, but if it looks
> ok, check to make sure the fuse ends and the tabs it contacts aren't
> corroded/oxidized.  If ok and the Flasher still doesn't work, it may
> need replacing.
> 
> *  If the Turn Signals/Flasher is working, check to make sure the
> plastic connector is securely fastened to the back of the Hazard
> Switch and the connector terminals are clean. If this checks out OK,
> then the switch may have to be replaced.
> 
> VW 171 953 235 A - Fits 84-91 Vanagons171953235A:
> 
> http://www.busdepot.com/171953235a
> 
> -- 
> Jim Thompson
> 84 GL 1.9 "Gloria"
> 84 Westfalia 2.1 "Ole Putt"
> 72 411 Station Wagon "Pug"
> 75 914 1.8 "Nancy"
> Full Timing From March 1999 To January 2012
> oldvolkshome@gmail.com
> http://www.oldvolkshome.com
> Find me on Facebook:
> http://www.facebook.com/people/Jim-Thompson/100000710343835
> ***********************************
> 
> On Wed, Oct 3, 2012 at 3:08 PM, Jamie Fitterer <fittdog8848@hotmail.com> wrote:
> > Hey everyone,
> >
> >
> > When I push int eh Hazard light it stays solid lit no blinky?  What could cause this?   ALways have worked before.
> >