

| Subject: | Re: bottom alternator bolt on 91 Westy |
| From: | JRodgers |
| Date: | Sun, 7 Oct 2012 03:20:17 -0500 |
I have encountered clearance issues on the head of that bolt. Ground off a bit of the head on one side and it now slips right out or in - no problem. John On 10/6/2012 11:53 PM, Scott Daniel - Turbovans wrote: > thanks for pointing that out. > - that not all of brackets have a square hole on the forward end. > > Scott > > On 10/6/2012 9:42 PM, Dennis Haynes wrote: >> Don't recall exactly when but VW went away from the carriage bolts and >> the >> later, replacement brackets don't have the square hole to use them. >> I don't think you can get P.C. 10.9 bolts in carriage head. >> >> Dennis >> >> -----Original Message----- >> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On >> Behalf Of >> Scott Daniel - Turbovans >> Sent: Saturday, October 06, 2012 9:01 PM >> To: vanagon@GERRY.VANAGON.COM >> Subject: Re: bottom alternator bolt on 91 Westy >> >> Depends .. >> what's stock is a round carrage head bolt on the forward end of the >> altnernator brkt. >> >> it's a hex nut or bolt there .. >> pretty sure I use a short box wrench. >> >> >> On 10/6/2012 4:25 PM, Steven Johnson wrote: >>> Hey Scott, >>> >>> Thanks, I guess my box end wrench isn't quite long enough.... :( >>> >>> Steven >>> >>> On Sat, Oct 6, 2012 at 4:14 PM, Scott Daniel - Turbovans < >>> scottdaniel@turbovans.com> wrote: >>> >>>> You don't have to remove the PS parts. >>>> If it's stock ..the forward end of the bolt is like a carriage bolt -.. >>>> square under the bolt head, in a square hole so it won't turn. >>>> >>>> But even it's not like that you can still sneak a box wrench back in >>>> there without taking much else apart. >>>> >>>> >>>> >>>> On 10/6/2012 2:49 PM, Steven Johnson wrote: >>>> >>>> Hi all, >>>> >>>> I need to replace the alternator on my 91 Westy (manual). Can one of >>>> you folks tell me what the trick is to removing the bolt. I can't see >> how >>>> to >>>> access behind the alternator. >>>> >>>> My best guess is that you have to remove the power steering pump >>>> bracket? >>>> >>>> Thanks! >>>> >>>> Steven >>>> 91 Westy >>>> >>>> >>>> >>>> >> >
Have something to add on this topic today? Revive this thread in the forum »