I'll be doing the inside seams with FF after I deal with the rust. One thing though, probably best  glue ram -mat or B-quiet onto panels before applying FF. Attaching insulation/ any ideas Neil? Floating panels?

alistair

 
On 2012-10-12, at 12:13 PM, neil n wrote:

> FWIW, I applied that stuff inside my Westy. More than 1/2 a can to
> seams behind kitchen.
> 
> Smell still there, but less so. Heat makes smell stronger. Stuff
> sticks good. "Ug". Me use good English.
> 
> Am considering getting a bucket of FF and "painting" it to panel and
> floor behind kitchen prior to insulating, cabinet re-install.
> 
> Overkill? Oversmell?
> 
> Neil.
> 
> On Thu, Oct 11, 2012 at 9:53 PM, Alistair Bell <albell@shaw.ca> wrote:
>> I managed to spray some Fluid Film on the underbody of the van today. I bought a gallon of the stuff a while back (up until now I had been buying spray cans of the stuff). It is a nice feeling, and (to me) a nice smell to have the underside of van glistening with the stuff.
>> 
>> prelim pics (no underbody shots yet) here:
>> 
>> http://shufti.wordpress.com/2012/10/11/vanagon-fluid-film-doesnt-taste-that-bad/
>> 
>> alistair
> 
> 
> 
> -- 
> Neil n
> 
> 65 kb image Myford Ready For Assembly  http://tinyurl.com/64sx4rp
> 
> '88 Slate Blue Westy to be named.
> 
> '81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/
> 
> Vanagon VAG Gas I4/VR Swap Google Group:
> 
> http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines