Yes!

Plan: glue narrow blocks of Rigid Board to panel, apply FF, vapour
barrier, then Rigid Board. A floating panel is the goal. Create a
little breathing room and air insulation between insulation and panel.

Very long term approach, but my UN-educated theory is that applying
sticky type insulation to panel will only create more prep time come
time for body work. (rust will happen eventually)

A test piece of RB has been glued using contact cement and sticks well
to painted metal. The contact cement is rated to 70� C  (158� F) so
should hold up.

Neil.

On Sat, Oct 13, 2012 at 5:38 AM, Alistair Bell <albell@shaw.ca> wrote:

> .... One thing though, probably best  glue ram -mat or B-quiet onto panels before applying FF. Attaching insulation/ any ideas Neil? Floating panels?
>
> alistair
>
>
> On 2012-10-12, at 12:13 PM, neil n wrote:

>> Am considering getting a bucket of FF and "painting" it to panel and
>> floor behind kitchen prior to insulating, cabinet re-install.

-- 
Neil n

65 kb image Myford Ready For Assembly  http://tinyurl.com/64sx4rp

'88 Slate Blue Westy to be named.

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG Gas I4/VR Swap Google Group:

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines