"Yes" to both questions.  The ground is good all the way to the contact for
the bulb.  I will try swapping out the bulb as others have suggested.

Thanks,
Bryan

-----Original Message-----
From: Ken Wilford
Sent: Thursday, October 18, 2012 11:43 AM
To: Bryan Feddish ; VANAGON@GERRY.VANAGON.COM
Subject: Re: Blinker issue

Bryan, did you try replacing the end connectors that plug into the new
socket?  Many times these are rusted and need to be replaced as well.
If you did, then check the ground wire with an ohm meter to see if it is
actually providing a ground path.

--
Thanks,
Ken Wilford
John 3:16
www.vanagain.com
Phone: 856-327-4936
Fax: 856-327-2242

On 10/18/2012 10:16 AM, Bryan Feddish wrote:
> I have an issue with the right side blinker blinking really fast.  At
> first, the front bulb was out. OK, I go to replace it and socket falls
> apart.  I replace the socket and the bulb. Now both front and back blink
> but really fast.  I checked the ground in both front and back.  The ground
> wires are grounded to the vehicle.  What I did notice is that when I
> disconnect the ground the lights still do the same thing.
>
> Thoughts?
>
> Thanks,
> Bryan
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2013.0.2741 / Virus Database: 2614/5839 - Release Date: 10/18/12
>
>
>