There is only 1 wire coming from the stalk switch for both hi beams, and
then it splits into 2 circuits at the fuse box to go to the wires to
each bulb. It can't really be the switch or the wire causing only 1 hi
beam to work. It has to be at the fuse box or past there.

Naturally, someone could have wired something screwy.

mark

Cunegonde wrote:
> Thank you again for specific circuit testing.
>
> The driver's side hi beam stays on when I let go of the  stalk. The hi beam indicator works. These are why I didn't think the column stalk switch was internally malfunctioning. It's connections might be, and now that I have soecific wiring path suggestions, will get on it!
>
>
>
>