All it usually means when the clutch pedal won't move is that the slave
cylinder piston is already at full extension. If the slave is not fully
or properly installed in the bellhousing bracket or the slave lever on
the side of the tranny is broken off, or the cross shaft inside the
bellhousing is broken, any will cause this.

Mark

J Stewart wrote:
> So, I was playing around with my "new" Blue Star today......... But, another thing I noticed, the clutch pedal won't budge, it is locked up tight-what would cause this? And still looking for a 2.1 motor close to Virginia!
>
>
>
>
> Jeff Stewart
>