I always had trouble with the control cables in my '82 westy. Stiff action and getting kinks etc. I spent a fair bit of time trying to make things work better - making sure the ends were correctly secured, following bentley, lubricating, even adding helper springs at the ends - but never did get them to work as nicely as the ones in my '86. Those work perfectly well, some magic sauce must have been added. Cable re-desing or something.

alistair

On 2012-11-09, at 2:01 PM, Rocket J Squirrel wrote:

> So last spring I took the entire dash out and performed all kinds of
> maintenance: fixed the leaky flapper vents, replaced the blower motor
> and the heater core, installed new MBC, took the wiper gear apart and
> re-greased it, and several other things. But the main reason I decided
> to get in there is that the footwell flap cable had bound up then broke.
> Stuck partway open. I replaced the cable it and checked its operation,
> then re-assembled the whole mess. It all worked like a charm although
> the footwell flap control seemed a little tough to move.
> 
> Today I tried to open the footwell and it doesn't. The lever moves, the
> stupid footwell flap stays closed. I can only get warm air out the
> defogger vents.
> 
> Grrrrr.
> 
> --
> Jack "Rocket j Squirrel" Elliott
> 1984 Westfalia, auto trans,
> Bend, Ore.