... and to that end \|/ I'll endorse the capillary action of `PB Blaster'(R). however. if you have the time to pull the lever housing and get it to where oil will work down into the sleeve as you work the cable {LOL} Marvel Mystery Oil(R) smells kinda nice ... for a petrol product ...��

 

________________________________
 From: Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
To: vanagon@GERRY.VANAGON.COM 
Sent: Monday, November 19, 2012 2:44 PM
Subject: Re: Lube for heater control cable?
  
Hi Jack,

mainly as long as one uses something half decent or better ..it will be
fine.
I would not use engine oil on a cable ..
but just about any good spray lube will work.

Scott
http://www.turbovans.com/

On 11/19/2012 8:21 AM, Rocket J Squirrel wrote:
> I griped a couple weeks ago ...
>
> Learning from my mistakes.
>