You need two 13mm open end wrenches. 

-craig

On Nov 29, 2012, at 12:13 PM, Angus Gordon <birdworks@GMAIL.COM> wrote:

> The propshaft which joins your transaxle to the front diff/VC can be removed. Four bolts/nuts at each end. 
> 
> Angus
> 
> 
> Angus Gordon
> Bainbridge Island WA
> 
> On Nov 29, 2012, at 8:56 AM, "sailingfc @dslextreme.com" <sailingfc@dslextreme.com> wrote:
> 
>> That's very interesting.  Can you describe what you have to do to remove the driveshaft and which one are you removing? (or can I search for it in the archives?)
>> Thanks.
>> -Dick-
>> 
>> On Thu, Nov 29, 2012 at 7:41 AM, Angus Gordon <birdworks@gmail.com> wrote:
>> 
>> I carry a mismatched spare tire, along with a set of open end wrenches to remove the driveshaft should I ever need to use the spare. A decoupler would be nice - wrenches are cheaper.
>> 
>> Angus
>> 
>> 
>> Angus Gordon
>> Bainbridge Island WA
>> 
>> On Nov 28, 2012, at 11:31 PM, Dick Wong <sailingfc@DSLEXTREME.COM> wrote:
>> 
>>> You're right, tires are cheaper than a VC.  I guess I'll go shopping this
>>> weekend and see what I can find for the spare.  If I can't find the same
>>> tire, I hate to toss out a set of A/T light truck tires that only have about
>>> 11K miles on them.
>>> 
>>> -Dick-
>>> 
>>> 
>>> -----Original Message-----
>>> From: Dennis Haynes [mailto:d23haynes57@hotmail.com]
>>> Sent: Wednesday, November 28, 2012 11:17 PM
>>> To: 'Dick Wong'; vanagon@GERRY.VANAGON.COM
>>> Subject: RE: New owner questions-Syncro ownership costs.
>>> 
>>> 4/32" is a worn out tire anyway. Test have shown wet traction at that point
>>> is half along with reduced hydroplaning resistance. AT tires can be 15/32"
>>> or more new. One different tire on an axle is not as bad as two. And a new
>>> coupling can be $2K plus installation. Makes matched tires cheap. If your
>>> coupling fails in the excessive aggressive mode than consider a drive shaft
>>> de-coupler.
>>> 
>>> Dennis
>>> 
>>> -----Original Message-----
>>> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
>>> Dick Wong
>>> Sent: Thursday, November 29, 2012 1:40 AM
>>> To: vanagon@GERRY.VANAGON.COM
>>> Subject: Re: New owner questions-Syncro ownership costs.
>>> 
>>> Wow, that's not much!
>>> 
>>> So a brand new tire has maybe 12/32" depth on the new tread. If I put on the
>>> same tire worn tire down to say 4/32" tread depth, the difference from the
>>> center of the tire to the tread is 0.25" or 6.4mm.
>>> That's enough to fry my VC?
>>> 
>>> -Dick-
>>> 
>>> 
>>> -----Original Message-----
>>> From: Robert Stevens [mailto:mtbiker62@gmail.com]
>>> Sent: Wednesday, November 28, 2012 10:18 PM
>>> To: Dick Wong
>>> Cc: vanagon@GERRY.VANAGON.COM
>>> Subject: Re: [VANAGON] New owner questions-Syncro ownership costs.
>>> 
>>> 
>>> On Nov 28, 2012, at 10:29 PM, Dick Wong <sailingfc@DSLEXTREME.COM> wrote:
>>> 
>>> So how much difference in tire size is considered a mismatch?  I have
>>> 27x8.50-14s all around and the spare is 205/70x14. According to my tire
>>> calculator that's a difference of 1.63" between the two.
>>> 
>>> IIRC, about 3mm is max tolerance before your VC notices and burns up. That
>>> is about $1K to replace.
>>> 
>>> bob
>>> -----
>>> No virus found in this message.
>>> Checked by AVG - www.avg.com
>>> Version: 2013.0.2793 / Virus Database: 2634/5925 - Release Date: 11/28/12
>>> 
>>> -----
>>> No virus found in this message.
>>> Checked by AVG - www.avg.com
>>> Version: 2013.0.2793 / Virus Database: 2634/5925 - Release Date: 11/28/12
>>