I like that repair idea better than what I did:

https://sites.google.com/site/tubaneil2/radiusarmholerepair

Cutting the hole in the patch wasn't rocket surgery but starting with
a nice round hole makes more sense.

If Bretts radius arm is damaged like mine was:

https://sites.google.com/site/tubaneil2/radiusarm

if a weldor made a pass then shaped, would that be structurally
sufficient? Or even required?

Neil.

On Mon, Jan 21, 2013 at 6:47 PM, Dennis Haynes <d23haynes57@hotmail.com> wrote:
>
> That hole really needs a weld repair. Here is a link to the washer I weld in
> to repair this.
>
> http://www.mcmaster.com/#93162A380
>
> A 1-9/32" washer (1-1/8 bolt size) will also work.
>
> Dennis
>

--
Neil n

65 kb image Myford Ready For Assembly  http://tinyurl.com/64sx4rp

'88 Slate Blue Westy to be named.

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG Gas I4/VR Swap Google Group:

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines