http://www.thesamba.com/vw/classifieds/detail.php?id=1407896

This the wrong stat. Note the size of the lower disc and it is flat.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Ted Baird
Sent: Sunday, February 3, 2013 9:49 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Noisy Valve lifters

I just fired up my 87 Westy after two weeks in chilly Boise storage with no
lifter noise.  Maybe this is going over ground already covered here, but I
found that after I stopped using Bosch oil filters I don't get the
clackety-clack because the Mann and Maile filters have a check valve that
somehow prevents the lifter noise.  Have others had this same experience,
and does anyone have a better explanation of why this makes a difference?
Boise Ted.

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Scott Daniel - Turbovans
Sent: Sunday, February 03, 2013 2:09 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Noisy Valve lifters

Sitting for long periods often contributes to noisy lifters for a little
while after you start it up.

I have also seen very short periods of operation do that too...like run it
just enough to back out of a garage say ..
do that a few times and it can make lifters noisy too.

what do the engine builders say ?

On 2/3/2013 9:08 AM, John Goubeaux wrote:
> Howdy Folks,
>
> I've  got a 2.2 GoWesty engine that has roughly 6K miles on it. It's
> running fine -but because I am not driving it a lot, it can sit for a
> week or more before I fire it up and drive it, the valve lifters have
> clacked on several occasions while the engine is cold. After several
> miles and higher RPMs the noise eventually goes away. I've seen this
> on older Waterboxer engines I have had ( with lots of miles on them),
> BUT the question is: Is this something to worry about at all given
> it's a new engine OR b/c it often sits for longer periods IS this normal ?
>
> -john
>