Whoa Ben, not going hi-press. on the wiper washer pump yet... just musing about a relay for the stock one.

But I do admit to envy every time I see a modern car washer spurt so vigorously :) 

R&D dept of Bell Industries has reported back to me, they have the titanium sheet stock, they are just discussing amongst themselves whether to shamelessly copy the "camp-a- toaster" (http://www.dyersonline.com/world-famous-stovetop-camp-a-toaster.html), or make one with stainless mesh support grid.

The R&D guys dither around so much it infuriates me.

:)

alistair

On 2013-02-10, at 12:29 PM, Ben T wrote:

> Anything is possible but the pump in question is a higher pressure type which is not as common as those found in your FLAPS. I did find the P/N search yielded several alternatives which can actually pop into the cavity on the side of the large capacity washer tank. The only difference being the word of the day - connections.
> 
> The connector on the T3 are side-by-side connectors. The ones on the Audi version of the pump is in a 'T' or 'L' configuration. No big deal if you are making your own harness for it. 
> 
> Alistair is looking at the hi-press pump to solve his lack of flow issue. It might be overkill in that application IMHO, but we are talking Alistair here, afterall. Can't wait to see the upcoming titanium Excelsior toaster.:-)
> 
> 
> BenT
> 
> sent from my electronic leash
> 
> On Feb 10, 2013, at 12:18 PM, neil n <musomuso@GMAIL.COM> wrote:
> 
>> Would an aftermarket "universal" type pump be suitable for this application?