In order to powdercoat, you need to have the parts removed in order to apply
the plastic powdercoat with an electrical charge. Then you need to bake the
parts anywhere from 400-450 degrees in a powdercoat oven in order to melt
the powdercoat material. I do this at home with a dedicated powdercoating
oven and powdercoating gun kit.
HTH,
Courtney

========I'm thankful to all those who said "no". Because of them I did it
myself.========
-----Original Message-----
From: Jim Felder
Sent: Monday, February 11, 2013 3:29 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Powder coating question--westy stuff

I was thinking about having my table legs powder coated in silver because
of the bits of corrosion and nicks that have accumulated on them over the
years. While I'm at it, I would like to powder coat the spring-loaded top
raising mechanism. Will this be possible without taking the thing apart?
From my dealings with these things loose out of the car, dealing with them
is like trying to fight an ostritch. I would not want to take one apart.

Jim