Dick,
   I should have looked at your link to the pics before replying. The
hole is right at the bend, which would preclude a straight union, but
maybe you could use or cobble together a 90 degree union.  This is a
plastic line right?  The line could be recreated in
copper-nickel-ferrous brake line with solder-on banjo ends.  I can do
this if you're interested.  I made a replacement power steering line for
my '87 Westy recently.  Works great and will outlast the van.  I also
recently replaced every brake line, hose and fitting on this same van,
from master cylinder to all four brakes;

http://www.thesamba.com/vw/forum/viewtopic.php?t=439344&postdays=0&postorder=asc&highlight=complete+brake+line&start=20

Mike B.

On 2/9/2013 11:35 PM, Dick Wong wrote:
> http://tinyurl.com/c77869z
>
> Well I finally pulled the clutch line on the Syncro to see where it failed
> me.  I added a couple of pictures on the above link.
>
> So the failure is not what I expected.  I thought I was going to see a crack
> or jagged break in the line, but there is a round hole.
>
> Well that is not as important as to where can I get a new clutch line.
> Dealer says NLA.  They referred me to Van Caf�.  Bought one from Van Caf�
> and it was way too short.  As it turns out, they don't have a clutch line
> for a Syncro.  In all the years they have sold this line, apparently it was
> never for a Syncro.  This is the first time anyone has returned one.
>
> So where can I find one of these guys?  I was thinking of finding some
> Teflon hose from McMaster.  The metal ends appear to just be barbed ends.
> My brother-in-law says motorcycles have a similar setup with a plastic line
> from the hand lever down to the clutch/brake.
>
> Any known sources for this?
>
> -Dick Wong-
> 78 Scirocco
> Original Owner
> 87 Vanagon Syncro 2.5 (slightly crispy)
> Third Owner
> 12 Golf TDI
> Original Co-Owner