Or worded another way....

If a 2' section of covered wire is not secured to the body, would
vibrations cause excessive wire movement in that section?

Neil.

On Sat, Feb 16, 2013 at 12:02 PM, neil n <musomuso@gmail.com> wrote:

> image. Arrow points to intended location:
> https://lh6.googleusercontent.com/-qPdIzZgxrFY/UR_k7-An-KI/AAAAAAAAG7Q/zuzkWdSefEA/s576/12%2520Volt%2520Outlet.jpg

> Plan is to run the + supply wire up the passenger side vent, then
> through interior wall.
>
> Will securing wire at area behind tail light, and up higher near the
> vent be sufficient?

--
Neil n

65 kb image Myford Ready For Assembly  http://tinyurl.com/64sx4rp

'88 Slate Blue Westy to be named.

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG Gas I4/VR Swap Google Group:

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines