DS & Jonce

        While what Jonce has suggested is possibly the problem it is possible
& quite probable

that the RollPin that attaches the Arm to the MountPin has backed out
~ I have seen this on

many Vanagons including my 90Westy & a friends 89 among others ~ if
you feel around the

area between the SeatBack & the ArmRest you will be able to feel the
RollPin if it has backed

out unless it has completely fallen out & disappeared.

                                                                                        ORR ~ DeanB

On 27 Feb , 2013, at 7:10 AM, Jonce Fancher wrote:

> Hi Dean
>
> Remove the arm rest ( Hex Allen Bolt ) then tighten the 2 Phillips
> head screws that have come loose.
> Reinstall the arm rest.
> The screws for the mount have come loose from the seat, No the arm
> rest from the mount.
>
> Hope that helps
> Jonce
>
>> In my excitable exuberance of receiving my first 85 Go Westy
>> package and
>> doing my first fix..new antennae..ok so I am starting small..I
>> managed to
>> un plug what I think is the end spade of the drivers side cabin dome
>> light..she worked up until this time..and it appears to be coming
>> down the
>> drivers window column . I managed to unplug it while fishing the new
>> antennae cable up through the dash-cluster removed- where does this
>> spade
>> plug into..for the life of me I can't find or see it's rightful
>> place..and
>> no Bently (on order) to reference.
>>
>> Also I have tried to tighten up the drivers seat arm rest's,using
>> the hex
>> bolt with no luck both flop around like a dead flounder..any tricks
>> to get
>> these tighter?
>>
>> Much thanks in advance.
>> DS
>
> Jonce Fancher
> www.fanchers.com
> 56 Single Cab
> 66 Square back
> 66 Sunroof Bug
> 66 Porsche 912
> 71 Sunroof Bus
> 78 Convertible Bug
> 85 Vanagon Westy Zetec
> 1 Understanding wife 2 Kids and Molly ( Beagle / Terrier Mix )