

| Subject: | Re: interior lighting - led strip |
| From: | neil n |
| Date: | Sun, 24 Feb 2013 14:08:45 -0800 |
Very helpful thanks! Neil. On Sun, Feb 24, 2013 at 12:49 PM, Alistair Bell <albell@shaw.ca> wrote: > I did some measurements with my installed Doc Wattson. Measuring current flowing from my aux battery. > > first, van as is: > > leds off, 1W, 85mA > leds full on, 9W, 750mA > leds dimmed lowest setting, 1.7W, 140mA > > Radio face plate off: > led lights off, <0.1W, <10mA > > For interesting comparison, kitchen water level/battery meter panel on, led lights off, between 0.2 and 0.3W, between 20 and 30mA. > > > So the led dimmer control draws a little power even when off, but it is less than the the kitchen indicator panel. > > Led strips both sides only draw 140mA power at lowest brightness. And that low setting is pretty good for a standby/casual use light. > > alistair -- Neil n 65 kb image Myford Ready For Assembly http://tinyurl.com/64sx4rp '88 Slate Blue Westy to be named. '81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/ Vanagon VAG Gas I4/VR Swap Google Group: http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines
Have something to add on this topic today? Revive this thread in the forum »