Ah. Thanks re "tip".

I used a regular but small OD roller.

The bubbles were a concern at first but they settled by themselves. I
was surprised at how much paint this part "ate up". It could use even
a 4th coat but that ain't gonna happen!

Neil.

On Mon, Mar 4, 2013 at 9:18 AM, Alistair Bell <albell@shaw.ca> wrote:
> I used a foam roller, worked on small sections (1-2 sq ft) at a time and "tipped" off the rolled areas with 2" natural hair brush. Tipping off to break any bubbles. I did not work the rolled areas much at all with brush, the paint levelled off by itself after a few minutes.
>
> alistair
>
>
> On 2013-03-04, at 9:00 AM, neil n wrote:
>
>> Thanks!
>>
>> Rolled.
>>
>> "Tip" means?
>>
>> Used a small brush for some bits of luggage cleats.
>>
>> Admittedly had a few runs as I loaded roller too much when painting
>> the repaired section. This paint may not sand as well as others.
>>
>> Neil.
>

-- 
Neil n

65 kb image Myford Ready For Assembly  http://tinyurl.com/64sx4rp

'88 Slate Blue Westy to be named.

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG Gas I4/VR Swap Google Group:

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines