You probably have realized by now - but it needs saying again - the
knobs themselves ARE NOT designed to be removed - but the flat shaft to
which they are attached is. So do your pulling not on the knobs
themselves - but on the shaft to which they are mounted. Others have
addressed how to do this best.

And please don't ask me how I know so much about those stupid knobs!!!

John

On 3/4/2013 1:57 PM, WILLIAM WITZ wrote:
> Hi all I have an 84 westy. I was wondering if you can pull the plastic knobs on
> the air/ heat levers in order to remove the plate. I have some new leds for my
> burnt out lights. Thanks in advance.
> Bill 84 westy -Tiico
>