

| Subject: | Re: Gas leaking after filling to the top...84 2wd.. |
| From: | Don Hanson |
| Date: | Mon, 11 Mar 2013 11:05:21 -0700 |
Ugg! Ooof! Thanks, fellas....I didn't want to hear 'drop the tank' to fix.....but I sorta recall that is the fix.... Don Hanson On Mon, Mar 11, 2013 at 11:02 AM, kenneth wilford (Van-Again) < kenwilfy@comcast.net> wrote: > Don, this is usually caused by either the plastic cross over pipe breaking > or the rubber vent lines on the top of the tank rotting out. I have fuel > tank kits that address these leaks by giving you all of the parts you need > to repair your tank properly. I also have a write up on my website about > how to remove and replace the tank and the gaskets. You will have to drop > the tank no matter what to fix this so if there is a rust hole on the top > or if you see the inside of the tank is rusty, you can replace that at the > same time. Usually it is just the soft parts that are bad though. > > Let me know if we can help you with this one. > > Ken Wilford > John 3:16 > www.vanagain.com > > > > On Mon, Mar 11, 2013 at 1:51 PM, Don Hanson <dhanson928@gmail.com> wrote: > >> I know this may be somewhere in the archives. I have never found the >> archives useable, so I am just List-asking straight out... >> >> My 84 has always had a slight gas odor after filling to the top...and >> not just from the usual 'spitting-up' that frequently seems to happen when >> you use the gas pump's auto shut-off feature... I've just been 'living >> with it' forever, thinking it was not so big a deal, but I recently >> noticed, after filling up, there was actually a small pool of gasoline >> under my van, and more still dripping out....Dunno whether this has been >> going on all along and I just noticed, or maybe the leak/overflow problem >> is getting worse....but not that I've seen this, I want to take care of >> the >> problem... >> >> Can someone point me to the fix for this problem, which I assume is >> frequent with our older vans, rotting hoses, etc...Thanks >> Don Hanson >> > >
Have something to add on this topic today? Revive this thread in the forum »