On 17 Mar , 2013, at 11:44 AM, neil n wrote:

>
> When folded out, the rear bed has always had a 3/4" - 1"  gap on the
> driver side between bed bottom and storage frame.

        Not sure I follow this ~ are you saying that the bed is 3/4"-1"
higher at that point on the drivers side when it is out flat

                                                                                        ORR ~ DeanB

> A few years ago, I
> tightened a bolt or other on this side so maybe I put it out of
> alignment.
>
> Is there a typical part or parts that wears, or, is there an
> adjustment, loosen a part or two, reposition, that might address this?
> It's a narrow spot to work in so direction toward the likely offender
> would be appreciated!
>
> Thanks
>
> Neil.
>
>
> --
> Neil n
>
> 65 kb image Myford Ready For Assembly  http://tinyurl.com/64sx4rp
>
> '88 Slate Blue Westy to be named.
>
> '81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/
>
> Vanagon VAG Gas I4/VR Swap Google Group:
>
> http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines