Neil, about those triangular bits, I may have been conflating the Reimo bed with the westy bed

see here

http://www.t3-infos.de/images/Reimo-Klappsitzbank.jpg

alistair

On 2013-03-17, at 10:44 AM, neil n wrote:

> Hi all.
> 
> Finally got my rear bed re-foamed and recovered. Pics and notes here.
> I may add more.
> https://picasaweb.google.com/musomuso/RearSeatBedReFoamEtc#
> 
> Anyhow.....
> 
> When folded out, the rear bed has always had a 3/4" - 1"  gap on the
> driver side between bed bottom and storage frame. A few years ago, I
> tightened a bolt or other on this side so maybe I put it out of
> alignment.
> 
> Is there a typical part or parts that wears, or, is there an
> adjustment, loosen a part or two, reposition, that might address this?
> It's a narrow spot to work in so direction toward the likely offender
> would be appreciated!
> 
> Thanks
> 
> Neil.
> 
> 
> --
> Neil n
> 
> 65 kb image Myford Ready For Assembly  http://tinyurl.com/64sx4rp
> 
> '88 Slate Blue Westy to be named.
> 
> '81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/
> 
> Vanagon VAG Gas I4/VR Swap Google Group:
> 
> http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines