Good point.

The issue was present before adapting 2 new connectors to harness.
(i.e. work on cluster)

The initial suspects were the bunged up traces where the 14 contact
connector seats. That's what spawned all this:

https://lh6.googleusercontent.com/-ZiDTNXUnu9U/UVNj02xnm_I/AAAAAAAAHVg/rdPEpxq3jgQ/s720/Cluster%2520Connector%2520Hell..jpg

Neil.

On Wed, Mar 27, 2013 at 1:53 PM, Dennis Haynes <d23haynes57@hotmail.com> wrote:

> I recently had this problem with my fox. To add to it, turn on high beams
> and clock would also turn off. Found ground trace on foil itself had a
> problem. Added a jumper on the foil, problem solved. Since you worked on the
> foil I would suspect it. The traces can look good but be NG.
>
> Dennis

--
Neil n

65 kb image Myford Ready For Assembly  http://tinyurl.com/64sx4rp

'88 Slate Blue Westy to be named.

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG Gas I4/VR Swap Google Group:

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines