Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Subject:Re: What's a Hall sender do?
From:Larry Alofs
Date:Mon, 8 Apr 2013 13:28:17 -0400

You can test it by removing the distributor cap and pulling the distributor
up far enough that you can turn the rotor by hand.  With the HV coil wire
near a ground, you should be able to produce some sparks.  (Ignition on)
 Injectors should also click.

Larry A.

On Mon, Apr 8, 2013 at 9:58 AM, john schaper <tahljohn@gmx.com> wrote:

> Still trying to diagnose and fix my intermittent start (latest theory is
> that it is do to dew point). Checked all grounds; saw some cracked wires to
> the distributor, spliced and repaired, vacuum lines connected, getting
> fuel, AFM is rebuilt, connections to fuel injection is good, coil is new,
> distributor is 2 years new as are spark plug wires. Swapped out a known
> good ECU with no effect. Now it won't start at all--just grinds with the
> engine turning. Now, after my recent repair fixes, it won't start and its
> 80 degrees! Reading the list and Bentley, the one item I haven't replaced
> or diagnosed is the Halls sender, generator or whatever is in the
> distributor. What does this thing do and could it be the problem?
>

Have something to add on this topic today? Revive this thread in the forum »