Stuart - there's no pop rivets for these felt channels but the front one
requires some dis-assembly if I recall correctly.  The scrapers pull
straight up but beware the clips that hold them in, if they fall out they
will go straight to the bottom of the door cavity (ask me how I know).  Can
be retrieved, though!

Alan Felder
Austin TX
82 Diesel Westy

Bitcoin Research Fund
Donate to: 1DwB7ad9avys3U1YzcLbQwfB27fAzbzBEN

On Fri, May 3, 2013 at 11:04 AM, Stuart MacMillan <stuartmacm@gmail.com>wrote:

> On other cars I've had to remove the window with the mechanism to get at
> pop
> rivets that fastened the bottom scraper and to replace the entire felt
> channel down to the bottom of the door.
>
>
>
> I'll check the vendors.
>
>
>
> Thanks!
>
>
>
> Stuart
>
>
>
> From: Jeff Lincoln [mailto:magikvw@gmail.com]
> Sent: Friday, May 03, 2013 8:35 AM
> To: Stuart MacMillan
> Cc: Vanagon List
> Subject: Re: Replacing roll up window scrapers & channels
>
>
>
> I think that most of the onliune vendors carry the replacements for these.
>
>
>
> I have done this it isn't really all that hard. They will just pull off and
> the new ones should just go back on the same way. No real tools necessary
> if
> I remember correctly.
>
>
>
> Providing I am understanding you correctly. I replaced the entire window
> rubber on my '85 with the ones from my '90
>
>
>
>
>
>
> Thanks,
>
> Jeff
> '85 GL (Gertie)
> '78 Bus (Melissa) Patty's Bus
>