LOL!
Maybe the engine tin or exhaust if real lucky.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
neil n
Sent: Thursday, May 02, 2013 1:46 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Flywheel Bolts

Could a tool like this:

http://www.amazon.com/Lisle-29200-Hand-Impact-Tool/dp/B0002NYDRG

be used on the offending flywheel bolt? I have found this tool to be quite
handy. (i.e. front brake splash guard screws)

I know one doesn't have to pound the crap out of this tool to use it, but I
have no idea if (effectively) banging on the end of the crank is a bad idea.

Neil.

On Thu, May 2, 2013 at 7:04 AM, Steve Cotsford <cotsford@aol.com> wrote:

> Socket head cap screws are especially strong.

> If you are fighting one off, try using a vice grips on the outside (very
tight) and then giving the arm a good smack.

--
Neil n

Blog: tubaneil.blogspot.ca

'88 Westy http://tinyurl.com/c8rlw6p

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG Gas inline-VR Engine Swap Group:

http://tinyurl.com/d7gd5ej