I had a pin that kept coming out, I put locktite on it and that did work.
FWIW some hardware stores carry roll pins so you can buy just 2 (if I
don't have one to drop & not be able to find I'll have to go back to
the store).

Rob
vwrobb@gmail.com

At  5/9/2013 07:49 AM, Harold Teer wrote:
>Regarding the tiny pin (drift?) that holds the handle to the pivot.  I had
>a pin that continually worked out on the drivers side and replaced it with
>a new one which has worked great.  But, in buying one pin, I had to order a
>packet and don't need them.  If anyone needs one or two pins let me know
>and I can send what you need.
>
>Harold
>
>Harold Teer
>1991 Westy -- VANGAUX
>Harrisonburg, VA
>
>
>
>On Tue, May 7, 2013 at 10:30 PM, Ben <syncro@gmail.com> wrote:
>
> > Dean,
> >
> > There is a small pin which holds the handle to the pivot. Drive the pin
> > out and press the assembly as tight as you can. Then drive the pin back in.
> >
> >
> >
> > BenT
> > sent from my electronic leash
> >