I fiddled around a bit trying to come up with a spot to mount them, Ended up with the simple placement on dash (same as I had on my old '82). They are not intrusive and if you mount with double sided tape you don't have to drill holes. Routing the wires did require cutting a notch on the instrument panel cover, was the least destructive way I could come up with.

alistair

On 2013-06-18, at 11:46 AM, Stuart MacMillan wrote:

> Very timely!  I'm starting on that today.  Still trying to determine where
> to place them (2).  I had the same cups screwed to the area next to the
> instrument cover, your location looks better.
> 
> Stuart
> 
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
> Alistair Bell
> Sent: Tuesday, June 18, 2013 10:46 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject: aux gauges install
> 
> Last week I got around to installing some old VDO gauges. I got around to
> writing about it this week.
> 
> http://shufti.wordpress.com/2013/06/18/vanagon-auxiliary-gauges/
> 
> cheers
> 
> alistair
>